913 D2 Driver Settings

Golfers are always looking for ways to improve their game and gain an edge on the course. One way to do this is by optimizing the settings on their driver. The 913 D2 driver from Titleist is a popular choice among golfers, and it has several settings that can be adjusted to customize the club to fit the golfer’s swing. In this article, we will discuss the different settings on the 913 D2 driver and how they can impact your game.

Adjustable Settings:

The 913 D2 driver has four adjustable settings: loft, lie, face angle, and center of gravity (CG). Let’s take a closer look at each setting.

1. Loft: The loft of the driver refers to the angle of the clubface relative to the shaft. The 913 D2 driver allows for loft adjustments of up to 1.5 degrees, which can have a significant impact on the ball flight and distance. A higher loft will generally produce a higher ball flight and more spin, while a lower loft will produce a lower ball flight and less spin.
2. Lie: The lie of the driver refers to the angle of the clubhead relative to the ground. The 913 D2 driver allows for lie adjustments of up to 0.75 degrees, which can help golfers who tend to hit the ball too high or too low. Adjusting the lie can also affect the direction of the ball flight, with a more upright lie producing a draw bias and a flatter lie producing a fade bias.
3. Face Angle: The face angle of the driver refers to the angle of the clubface relative to the target line. The 913 D2 driver allows for face angle adjustments of up to 1.5 degrees, which can help golfers who tend to slice or hook the ball. Adjusting the face angle can also affect the loft and lie of the club, so it’s important to consider all three settings when making adjustments.
4. Center of Gravity: The center of gravity (CG) of the driver refers to the point on the clubhead where the weight is concentrated. The 913 D2 driver has a SureFit CG system that allows for adjustments of the CG location to promote a higher or lower ball flight, depending on the golfer’s needs. Moving the CG forward will generally produce a lower ball flight and less spin, while moving it back will produce a higher ball flight and more spin.

Factors to Consider When Making Adjustments:

Before making any adjustments to your 913 D2 driver, it’s important to consider the following factors:

1. Ball Flight: Understanding your typical ball flight is crucial when making adjustments to your driver. If you tend to hit the ball too high, for example, you may want to consider lowering the loft or moving the CG forward. Conversely, if you tend to hit the ball too low, you may want to increase the loft or move the CG back.
2. Swing Characteristics: Every golfer’s swing is unique, and it’s important to take your individual swing characteristics into account when making adjustments. If you tend to slice the ball, for example, you may want to adjust the face angle to a more closed position. If you tend to hook the ball, you may want to adjust the face angle to a more open position.
3. Course Conditions: The course conditions can also play a role in determining which settings to use on your 913 D2 driver. If the course is playing fast and firm, you may want to use a lower loft and a more forward CG to keep the ball from ballooning in the wind. If the course is playing wet and soft, you may want to use a higher loft and a more rearward CG to maximize distance.

Using the Adjustable Settings to Improve Your Game:

Now that we’ve discussed the factors to consider when making adjustments to your 913 D2 driver, let’s look at some specific ways to use the adjustable settings to improve your game:

1. Increase Distance: If you’re looking to increase your distance off the tee, you may want to consider lowering the loft and moving the CG forward. This will help reduce spin and launch the ball on a lower trajectory, resulting in more roll and greater overall distance.
2. Improve Accuracy: If accuracy is your primary goal, you may want to adjust the lie angle to match your swing characteristics. A more upright lie angle will generally produce a draw bias, while a flatter lie angle will produce a fade bias. Experiment with different lie angles to find the setting that produces the most consistent ball flight.
3. Control Trajectory: If you want more control over your trajectory, consider adjusting the CG location. Moving the CG forward will produce a lower ball flight with less spin, while moving it back will produce a higher ball flight with more spin. Adjusting the face angle can also have an impact on trajectory, so be sure to experiment with both settings to find the right combination for your game.

913 D2 Driver Settings for Loft

Loft	Lie	Length	Swing Weight	Flex
8.5	58.5	45″	D4	S
9.5	58.5	45″	D4	S
10.5	58.5	45″	D4	S
12	58.5	45″	D4	S
8.5	58.5	45″	D4	X
9.5	58.5	45″	D4	X
10.5	58.5	45″	D4	X
12	58.5	45″	D4	X
8.5	58.5	45″	D4	R
9.5	58.5	45″	D4	R

913 D2 Driver Settings for Face Angle

Loft	Lie	Length	Swing Weight	Flex	Face Angle
8.5	58.5	45″	D4	S	0.5° Open
9.5	58.5	45″	D4	S	0.5° Open
10.5	58.5	45″	D4	S	0.5° Open
12	58.5	45″	D4	S	0.5° Open
8.5	58.5	45″	D4	X	0.5° Open
9.5	58.5	45″	D4	X	0.5° Open
10.5	58.5	45″	D4	X	0.5° Open
12	58.5	45″	D4	X	0.5° Open
8.5	58.5	45″	D4	R	0.5° Open
9.5	58.5	45″	D4	R	0.5° Open

913 D2 Driver Settings for SureFit CG Weight

Loft	Lie	Length	Swing Weight	Flex	SureFit CG Weight
8.5	58.5	45″	D4	S	12g
9.5	58.5	45″	D4	S	12g
10.5	58.5	45″	D4	S	12g
12	58.5	45″	D4	S	12g
8.5	58.5	45″	D4	X	12g
9.5	58.5	45″	D4	X	12g
10.5	58.5	45″	D4	X	12g
12	58.5	45″	D4	X	12g
8.5	58.5	45″	D4	R	12g
9.5	58.5	45″	D4	R	12g

Conclusion:

Optimizing the settings on your 913 D2 driver can have a significant impact on your game, allowing you to hit the ball farther and more accurately. However, it’s important to remember that adjusting the settings requires a bit of trial and error, as every golfer’s swing is different. Experiment with different settings and see what works best for your game. With a little practice and experimentation, you can find the perfect settings for your 913 D2 driver and take your game to the next level.