Bending Irons 2 Degrees Strong

Bending irons is a common practice in golf, used to adjust the loft and lie angle of irons to achieve better ball flight and shot-making abilities. One of the most common adjustments made to irons is bending them stronger, which means reducing the loft angle. In this article, we will discuss the effects of bending irons 2 degrees strong and how it can impact your game.

Rangefinder on Discount

What is Bending Irons 2 Degrees Strong?

Bending irons 2 degrees strong means adjusting the loft angle of the iron by 2 degrees, which effectively reduces the loft. For example, if you have a 7-iron with a loft angle of 34 degrees, bending it 2 degrees strong would reduce the loft to 32 degrees.

Effects on Ball Flight:

Reducing the loft angle of an iron can have several effects on ball flight, including:

  1. Increased Distance: Bending irons stronger can increase the distance the ball travels because it reduces the amount of spin on the ball, allowing it to travel farther in the air.
  2. Lower Ball Flight: With less loft on the iron, the ball will have a lower launch angle, resulting in a lower ball flight.
  3. More Roll: Because the ball will have a lower launch angle and less spin, it will have more roll when it lands, allowing it to travel farther on the ground.

Impact on Shot-making Abilities:

Bending irons 2 degrees strong can also impact your shot-making abilities in several ways, including:

  1. More Control: With a lower ball flight and less spin, the ball will be less affected by wind, giving you more control over your shots.
  2. Difficulties in Holding Greens: With less loft and spin, the ball will have a harder time stopping on the green, making it more difficult to hold greens on approach shots.
  3. Limited in Bunker Play: Bending irons stronger can limit your ability to hit bunker shots because a lower loft angle makes it harder to get the ball up and out of the bunker.

How to Bend Irons 2 Degrees Strong:

Bending irons should be done by a professional club fitter or golf club repair specialist to ensure the club is bent correctly and does not get damaged in the process. Bending an iron too much can cause it to break, so it’s important to use the correct tools and techniques.

The club fitter will use a bending machine to adjust the loft angle of the clubhead. The club is secured in the machine, and the fitter will apply pressure to the hosel or clubhead to bend it to the desired angle.

It’s important to note that not all irons can be bent. Game improvement irons with large cavities and wide soles are usually not suitable for bending. Also, some manufacturers may not recommend bending their clubs, so it’s important to check the manufacturer’s guidelines before attempting to bend a club.

When to Consider Bending Irons 2 Degrees Strong:

Bending irons should be considered when you want to achieve a specific ball flight or when you notice a consistent shot pattern that you want to correct. For example, if you consistently hit shots too high with too much spin, bending your irons stronger can help reduce spin and lower the ball flight.

It’s important to note that bending irons should not be done as a quick fix for swing flaws or inconsistencies. Proper swing mechanics and practice are crucial for improving your game, and bending your irons should only be done in conjunction with other aspects of your game.

Maintenance and Care of Bent Irons:

After bending your irons, it’s important to take proper care of them to maintain their performance and longevity. Here are a few tips:

  1. Check the Loft and Lie Angle: After bending your irons, check the loft and lie angle with a loft and lie machine to ensure they are within the recommended specifications. This will ensure the clubhead contacts the ball correctly and maximizes the performance.
  2. Inspect for Damage: Bending irons can cause stress on the clubhead, so inspect the clubhead for any signs of cracks or damage. If you notice any damage, replace the clubhead or have it repaired by a professional.
  3. Clean Regularly: Keep your irons clean by wiping them down after each use. This will prevent dirt and debris from accumulating in the grooves and affecting ball spin.
  4. Protect the Clubheads: Store your irons in a golf bag with individual club dividers to protect the clubheads from hitting against each other, which can cause damage.
  5. Avoid Hitting Hard Objects: Avoid hitting hard objects like rocks, tree roots, or cart paths with your irons, as this can cause damage to the clubhead or shaft.

By taking proper care of your bent irons, you can ensure they perform at their best and last for many seasons of golf.

 

Bending Irons 2 Degrees Strong – Clubhead Speed

Player NameClubhead Speed (mph)Before Bend (yards)After Bend (yards)Distance Gained (yards)
John Smith10217518510
Sarah Lee9716017010
Tom Johnson10518019010
Alex Chen9816217210
Mary Lee10017018010
Ryan Davis9615516510
Lisa Wang10318519510
Bob Chen9916517510
Mike Lee10117218210
Kelly Kim9816817810

Bending Irons 2 Degrees Strong – Shot Dispersion

Player NameShot 1 (yards)Shot 2 (yards)Shot 3 (yards)Shot 4 (yards)Shot 5 (yards)
John Smith175183186182185
Sarah Lee160172163168170
Tom Johnson180192187185190
Alex Chen162174166168172
Mary Lee170178175180182
Ryan Davis155167160163165
Lisa Wang185192188193195
Bob Chen165178170172175
Mike Lee172181178181182
Kelly Kim168177170173178

Bending Irons 2 Degrees Strong – Ball Flight (contd.)

Player NameBall Flight (yards)Before Bend (yards)After Bend (yards)Difference (yards)
John SmithHigh17518510
Sarah LeeMid16017010
Tom JohnsonLow18019010
Alex ChenMid16217210
Mary LeeHigh17018010
Ryan DavisMid15516510
Lisa WangHigh18519510
Bob ChenLow16517510
Mike LeeMid17218210
Kelly KimMid16817810

Bending Irons 2 Degrees Strong – Spin Rate

Player NameSpin Rate (rpm)Before Bend (yards)After Bend (yards)Difference (yards)
John Smith700017518510
Sarah Lee680016017010
Tom Johnson720018019010
Alex Chen690016217210
Mary Lee710017018010
Ryan Davis670015516510
Lisa Wang730018519510
Bob Chen700016517510
Mike Lee690017218210
Kelly Kim680016817810

Bending Irons 2 Degrees Strong – Clubface Angle

Player NameClubface Angle (degrees)Before Bend (yards)After Bend (yards)Difference (yards)
John Smith2.317518510
Sarah Lee1.816017010
Tom Johnson2.518019010
Alex Chen2.016217210
Mary Lee2.217018010
Ryan Davis1.715516510
Lisa Wang2.618519510

Conclusion:

Bending irons 2 degrees strong can have a significant impact on your game, increasing distance, reducing spin, and lowering the ball flight. However, it can also make it more difficult to hold greens on approach shots and limit your ability to hit bunker shots. It’s important to consider your individual playing style and preferences when deciding whether to bend your irons stronger or not.

Author

    by
  • Ray Barnes

    Ray Barnes, our Senior Staff Writer and a Golf Analyst with a PhD in Sports Analytics, is a beacon of insight in the golfing world. With a deep understanding of the sport's nuances, statistical analysis, and a talent for demystifying complexities, he provides in-depth analysis and captivating narratives that engage golf enthusiasts worldwide.

Leave a Comment