How to Make Golf Cart Seat Covers

Making your own golf cart seat covers can be a fun and rewarding project, and it’s a great way to give your golf cart a personalized touch. Here are some steps to help you make your own golf cart seat covers:

Materials you will need:

  • Measuring tape
  • Scissors
  • Sewing machine
  • Fabric
  • Elastic

Step 1: Measure your golf cart seats Before you start making your seat covers, you need to measure the size of your golf cart seats. This will help you determine how much fabric you will need. Measure the width and length of each seat, and write down the measurements.

Step 2: Choose your fabric Once you have measured your seats, you can choose your fabric. Consider the climate you will be using your golf cart in and choose a fabric that is suitable for it. You can use any fabric that you like, but it’s recommended to use a durable and weather-resistant material. Canvas or outdoor fabrics are great choices for golf cart seat covers.

Step 3: Cut the fabric Using your measurements, cut the fabric to the appropriate size. Leave extra fabric on each side to allow for seam allowances.

Step 4: Sew the fabric Fold the fabric in half with the right sides together, and sew along the edges using a sewing machine. Leave one side open so that you can insert the seat cover. Once you have finished sewing, turn the seat cover right side out.

Step 5: Add the elastic To keep the seat cover in place, you need to add elastic to the bottom of the cover. Cut a length of elastic that is slightly shorter than the width of the seat, and sew it to the bottom of the seat cover. Make sure that the elastic is pulled taut so that it fits snugly around the seat.

Step 6: Install the seat cover To install the seat cover, simply slide it over the golf cart seat and adjust it so that it fits properly. You can also add ties or straps to the seat cover to keep it in place.

Step 7: Add any additional details If you want to add any additional details to your seat covers, now is the time to do it. You can add piping, buttons, or other embellishments to give your seat covers a unique look. You can also add pockets to the back of the seat covers for storage.

Step 8: Make matching accessories To complete the look of your golf cart, you can make matching accessories such as steering wheel covers, floor mats, and storage covers. Use the same fabric and design as your seat covers to create a cohesive look.

Step 9: Maintain your seat covers To keep your seat covers looking great, it’s important to maintain them properly. You can wash them in the washing machine using a mild detergent, and hang them to dry. Avoid using bleach or harsh chemicals, as this can damage the fabric.

Making your own golf cart seat covers is a great way to personalize your golf cart and protect your seats. With a little bit of time and effort, you can create custom seat covers that fit perfectly and look great. Just remember to choose the right materials and maintain your seat covers properly to ensure that they last for years to come.

Materials Needed for Making Golf Cart Seat Covers

MaterialDescriptionQuantity Needed
Marine vinylWaterproof and durable fabric for seat cover2 yards
Foam paddingProvides cushioning for the seat1 inch thick
ThreadHeavy-duty thread for sewing1 spool
Upholstery needleNeedle with a large eye for sewing through thick fabric1
ScissorsUsed for cutting fabric and foam1 pair

Measuring and Cutting the Fabric and Foam

StepDescription
Measure the seatUse a tape measure to determine the seat’s dimensions
Add seam allowanceAdd 1 inch to all sides for seam allowance
Cut the foam paddingUse scissors to cut the foam to the seat’s dimensions
Cut the vinyl fabricUse scissors to cut the vinyl to the seat’s dimensions
Cut the foam cornersCut the corners of the foam to fit the seat’s shape

Sewing the Seat Cover

StepDescription
Sew the front and backSew the vinyl together along the top and sides, leaving the bottom open for sliding the foam padding into place
Insert the foam paddingSlide the foam padding into the cover and adjust it to fit snugly
Sew the bottom seamFold the bottom edges of the vinyl inward and sew them together to close the seat cover
Hem the bottom edgeFold the bottom edge of the vinyl under and sew it in place to create a clean edge
Attach the seat coverPlace the seat cover on the golf cart seat and attach it securely using elastic cords or other fastening mechanisms

Adding Extra Features to the Seat Cover

StepDescription
Add pocketsCut additional pieces of vinyl and sew them onto the seat cover to create pockets for storing golfing accessories
Embroider the coverUse an embroidery machine to add a personal touch to the seat cover with designs or initials
Add pipingSew piping along the edges of the seat cover to add a decorative touch and reinforce the seams
Install zippersInstall zippers on the seat cover to make it easy to remove and wash the cover
Add seat beltsSew seat belt openings into the cover to allow for the installation of safety belts

Tips for Making Golf Cart Seat Covers

TipDescription
Use a heavy-duty sewing machineA regular sewing machine may not be able to handle the thickness of the vinyl and foam padding
Use a walking footA walking foot can help to prevent the vinyl and foam from shifting while sewing
Test the thread strengthBefore sewing the entire seat cover, test the strength of the thread by pulling it firmly
Practice on scrap fabricIf you’re new to sewing, practice on scrap fabric first to get comfortable with the techniques involved
Choose the right colorChoose a vinyl color that complements the color scheme of your golf cart for a cohesive look

Author

    by
  • Ray Barnes

    Ray Barnes, our Senior Staff Writer and a Golf Analyst with a PhD in Sports Analytics, is a beacon of insight in the golfing world. With a deep understanding of the sport's nuances, statistical analysis, and a talent for demystifying complexities, he provides in-depth analysis and captivating narratives that engage golf enthusiasts worldwide.

Leave a Comment